1.Plug In And Chink The Indicator Light, Open The Crushing Machine Cover, Nothing In The Grinding Slot.

2.Fasten Up The Cover ,Switch On And Make The Machine Idle For One Or Two Minutes, No Abnormal Phenomenon, Then Use It.

3.Power Cut, Open The Cover, Load The Materials, Don’t Over The Maximum, Fasten Up The Cover, Plug In And Switch On, During The Operation, Crushing Sound From Noisy To Uniform, It Mains That Crushed Into Powder, You Can Turn It Off. General Materials Need Thirty Seconds And High Hardness Of Materials Need One Or Two Minutes, Boot Time Shall Not Exceed 8 Minutes At A Time.

4.Power Cut, Open The Cover, Clean Up The Grinding Slot.